Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Today's instructions will allow us to disassemble and replace the rear light and its bulbs of the Peugeot 3008. First, we open the rear hatch of the trunk and start removing the plastic cover located next to the light fixture; then we unscrew the fixing screws found underneath, as shown in the video.

At this point, we disconnect the electrical connector of the bulbs to remove the rear light, replacing the brake lights or the entire taillight; we reassemble and connect the rear light, applying the reverse procedure.


Posted on 31 January 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light on the Peugeot 3008
How to Remove the Rear Light on the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this guide, you will discover the steps to safely remove the rear light on your first-generation Peugeot 3008. First, park the car on a flat surfa…
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Remove the Rear Headlamp from a Peugeot 3008
How to Remove the Rear Headlamp from a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) How do you remove the rear headlamp from your Peugeot 3008 SW? In this video, see how to replace the headlamp and the damaged bulbs. Open the boot li…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos