Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this guide, you will discover the steps to safely remove the rear light on your first-generation Peugeot 3008. First, park the car on a flat surface and turn it off completely. Then, position yourself in front of the rear light you want to remove and lift the rear hatch.

Next, remove the plastic cover located next to the light and unscrew all the screws using a suitable crosshead screwdriver. Finally, pull the light towards you and disconnect the electrical connector.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to Remove the Rear Headlamp from a Peugeot 3008
How to Remove the Rear Headlamp from a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) How do you remove the rear headlamp from your Peugeot 3008 SW? In this video, see how to replace the headlamp and the damaged bulbs. Open the boot li…
How to Remove the Rear Light of a Peugeot 3008
How to Remove the Rear Light of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Before you begin, open the tailgate of your Peugeot 3008. Start by prising off and removing the cover for the rear light fixing screws using a thin b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos