Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the particulate filter of the Peugeot 407 2.0 HDI

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Diesel particulate filter

Below we will see the main instructions that will allow us to disassemble and replace the particulate filter of the Peugeot 47 2.0 HDI. First, we open the engine hood of the vehicle and start disconnecting the exhaust manifold; in this case, the disassembly operation is carried out with the entire exhaust already removed, as shown in the video. At this point, we separate the manifold from the particulate filter, carrying out the cleaning of the latter or directly replacing the component; we reassemble the new DPF and finally the entire exhaust system of the vehicle.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Let’s briefly review the main steps to bleed the fuel system of the Peugeot 407 2.0 HDI if there is air present inside. First, open the bonnet of you…
How to disassemble the turbocharger of the Peugeot 407 1.6 HDI
How to disassemble the turbocharger of the Peugeot 407 1.6 HDI
Peugeot 407 (2004-2012 / MK 1) In this guide, we will see the main instructions useful for disassembling and replacing the turbocharger of the Peugeot 407 1.6 HDI. First of all, we…
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Today we will discover the main steps on how to disassemble and replace the starter motor of the Peugeot 407 2.0 HDI. First, we open the hood of the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos