Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Fuel System of the Peugeot 407 2.0 HDI

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

Video tutorial

Let’s briefly review the main steps to bleed the fuel system of the Peugeot 407 2.0 HDI if there is air present inside. First, open the bonnet of your car and start removing the engine protection cover; then disconnect the fuel filter pipe, allowing any excess fuel to drain into a container.

Locate another fuel line on the right side of the intake duct; perform the same bleeding procedure here. It is advisable to replace the fuel filter and check the fuel pump.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Replacing the Glow Plugs on a Peugeot 407 2.0 HDi
Replacing the Glow Plugs on a Peugeot 407 2.0 HDi
Peugeot 407 (2004-2012 / MK 1) The instructions in this guide will illustrate the procedure for removing and replacing the glow plugs in the engine of a Peugeot 407 2.0 HDi. First,…
How to disassemble the turbocharger of the Peugeot 407 1.6 HDI
How to disassemble the turbocharger of the Peugeot 407 1.6 HDI
Peugeot 407 (2004-2012 / MK 1) In this guide, we will see the main instructions useful for disassembling and replacing the turbocharger of the Peugeot 407 1.6 HDI. First of all, we…
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Replacement of the starter motor of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Today we will discover the main steps on how to disassemble and replace the starter motor of the Peugeot 407 2.0 HDI. First, we open the hood of the …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos