Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Peugeot 407?

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Fuel pump

To replace the fuel pump on the Peugeot 407, you need to unclip the fastening clips located at the front of the rear seat: once unclipped, these will allow you to remove the seats and access the components underneath. The circular cover in this area will provide access to the pump once removed: the pump must then be pulled out of its housing by unscrewing the fastening screws and disconnecting the pipes and power cables. This way, you can insert the new replacement part and reassemble the rear seat.

Updated on 5 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Let’s briefly review the main steps to bleed the fuel system of the Peugeot 407 2.0 HDI if there is air present inside. First, open the bonnet of you…
Where Are the Fuses in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The fuses in the Peugeot 407 are contained within the dedicated fuse boxes installed in the vehicle: this model has two boxes. The first is located i…
Fuel Pump Failure in Peugeot 407 or Citroen C4
Fuel Pump Failure in Peugeot 407 or Citroen C4
Peugeot 407 (2004-2012 / MK 1) The problem described in this video is very common in Peugeot 407, Citroen C4, and other BSA group models with BSI modules. The issue involves the fu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos