Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 2, P84
- Years 2016-2023 In this video, we see the procedure for inserting the EAT8 gearbox into the Peugeot 3008. It is not a very simple procedure: nothing impossible, mind you, but it must be learned. So, while holding down the brake pedal, we start the car, which is in "P", press the "unlock" button on the gearbox, and press "N", then turn off the car, release the brake pedal, and then turn on the car again. Let's pretend to put it into gear (but without pressing the "unlock" button). Turn off the car again, which now remains in "N". If we now press the start button again, the car remains in "N". To reset it to "P", just press the "P" button and the corresponding LED lights up.
Posted on 7 October 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |