Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Peugeot 308 Clutch Pedal Sticking - The Peugeot 308 clutch pedal sticking issue is caused by a ridge forming on the wear pattern, leading to the pedal momentarily sticking and then popping up by itself. This can be due to a build-up of crud in the cylinder or a worn ball connector in the clutch master cylinder.
Page generated automatically based on user searches (*)
Reasons for the failure of the Peugeot 308 clutch pedal to return
Peugeot 308 (2013-2021 / MK 2, T9) .. In this video we can see the reasons why the clutch pedal of a Peugeot 308 does not return correctly. The problem, as we can see in the video, is..
How to grease the clutch pedal of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) .. In this video tutorial we can see how the clutch pedal of the Peugeot 308 is greased. The first thing to do is to remove the plastic cover where..
How to replace the clutch of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) .. this video we will show you how to replace the Peugeot 308 clutch. First remove the protective panel underneath on the front of the car, as seen in.. .. the various bolts that hold the body under the pedal apparatus so as to have access to the clutch. At this point, remove the clutch fluid cap and drain..
Repair of the clutch pedal on Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) .. First remove the plastic placed above the pedal board and under the steering wheel, simply by pulling it by hand as shown in the video. In this..
How to activate the cruise control of the Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) .. Activating the cruise control on the Peugeot 308 is a very simple procedure that can be done independently, thanks to our video tutorial... .. and check for three connections for the brake pedal and two for the clutch pedal. Once we have confirmed that the car supports the system, we proceed..
Why did the clutch pedal of the Peugeot 308 get stuck?
Answer: The locking of the clutch pedal in the Peugeot 308 may have been due to several factors. For example, it could be the total failure of the respective ... read all

Posted on 7-09-2022

Read Answer
What to do when the clutch pedal does not fully raise on the Peugeot 308?
Answer: If we find that when we go to press the clutch pedal it stays down, there is probably a problem with the thrust bearing that has worn out. Finally, it... read all

Posted on 8-05-2022

Read Answer
What to do when the clutch pedal on the Peugeot 308 does not go up?
Answer: If we notice that once the clutch pedal has been lowered it stays down without returning to its rest position, the pedal spring is probably broken and... read all

Posted on 26-05-2022

Read Answer
What to do when the clutch pedal does not fully rise on the Peugeot308?
Answer: In the event that we notice that when we release the clutch pedal on the car it does not return to the end of the stroke completely, probably the prob... read all

Posted on 4-05-2022

Read Answer
Why is the Cruise Control of the Peugeot 308 not working?
Answer: The possible causes of this malfunction could be the brake pedal and clutch pedal release sensors. They are housed above the pedals and sometimes it i... read all

Posted on 7-10-2022

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

  1. Video tutorial
    2. >
  2. Peugeot
    3. >
  3. 308
Possible Causes and Solutions for the Peugeot 308 Clutch Pedal Sticking Issue: The Peugeot 308 clutch pedal sticking issue is caused by a ridge forming on the wear pattern, leading to the pedal momentarily sticking and then popping up by itself. This can be due to a build-up of crud in the cylinder or a worn ball connector in the clutch master cylinder. The solution is to replace the clutch master cylinder with a redesigned part. Other potential causes of the sticking clutch pedal include a new clutch center plate, pressure plate, release bearing, or master cylinder that is not functioning properly. Additionally, the clutch slave cylinder rubbers may be weeping, the clutch cable may be broken, or the clutch mechanism may be jammed. In some cases, the clutch pedal may split open at the joint. The issue may be more common in early models, as later models have a different mechanism that reduces pedal effort. If the car has a later clutch cable system, there is no adjustment available. One potential remedy is to change the clutch fluid, as it may be causing the hydraulic system to pressurize the clutch incorrectly.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.