Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 308
  6. : Repair of the clutch pedal on Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 2, T9 - Years 2013-2021
Part: Clutch
Operation: Repair of the clutch pedal on Peugeot 308

First remove the plastic placed above the pedal board and under the steering wheel, simply by pulling it by hand as shown in the video. In this way you will have access to the three round clips that hold a further bulkhead: remove them with a small flat screwdriver and disassemble the second bulkhead. Now that you have access to the pedal mechanism, remove the cap and lubricate the area connected to the pump. At this point, if you also have the problem of the pedal not returning, you can replace the small white stop (which costs very little, around 12 €). If that doesn't work it is easy for you to replace the pedal pump.


Posted on 19 February 2024 by ScegliAuto



Reasons for the failure of the Peugeot 308 clutch pedal to return
Peugeot 308 (2013-2021 / MK 2, T9) In this video we can see the reasons why the clutch pedal of a Peugeot 308 does not return correctly. The problem, as we can see in the video, is a c
How to grease the clutch pedal of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) In this video tutorial we can see how the clutch pedal of the Peugeot 308 is greased. The first thing to do is to remove the plastic cover where the
How to replace the clutch of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) In this video we will show you how to replace the Peugeot 308 clutch. First remove the protective panel underneath on the front of the car, as seen i

Other guides that may interest you

    Frequently Asked Questions

    • 308 2007-2014 - What to do if you have problems with the clutch of the Peugeot 308? Read Answer
    • 308 2013-2021 - Why did the clutch pedal of the Peugeot 308 get stuck? Read Answer
    • 308 2013-2021 - What to do when the clutch pedal on the Peugeot 308 does not go up? Read Answer
    • 308 2007-2014 - What to do when the clutch pedal does not fully raise on the Peugeot 308? Read Answer
    • 308 2007-2014 - What to do when the clutch pedal does not fully rise on the Peugeot308? Read Answer
    • 308 2013-2021 - How much does it cost to replace the clutch of the Peugeot 308? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos