Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A common problem with the clutch pedal of the Peugeot 308.

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Clutch

We see an extremely common problem on the Peugeot 308. The clutch pedal stays on the floor and does not come back up after being pressed, leaving the car without gears and impossible to drive. Sometimes the pedal can also feel "soft" or have an irregular return before this complete failure. The most frequent culprit is the poor quality plastic clip, which breaks or comes off, causing the loss of mechanical connection. The pedal is then no longer attached to anything and falls to the end of its travel without engaging the clutch. In some cases, even the master cylinder can fail internally, but very often the problem is caused by the clip. We can replace it with a good quality one by purchasing the kit of two pieces on Amazon with the code B0DK7LGH94 at the price of 10.90 euros, free delivery for Prime customers. However, often the dismantling is used as an opportunity to change the entire cylinder.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Reasons for the Clutch Pedal Not Returning on a Peugeot 308
Reasons for the Clutch Pedal Not Returning on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video, you can see the reasons why the clutch pedal of a Peugeot 308 does not return correctly. The problem, as shown in the video, is a clip…
Replacement of the clutch pedal of the Peugeot 308
Replacement of the clutch pedal of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The information outlined in this guide will show us how to disassemble and replace the clutch pedal of the Peugeot 308. First, we open the front driv…
How to Grease the Clutch Pedal on a Peugeot 308
How to Grease the Clutch Pedal on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video tutorial, you will see how to grease the clutch pedal on a Peugeot 308. The first step is to remove the plastic cover above the clutch …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos