Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Grease the Clutch Pedal on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Clutch

In this video tutorial, you will see how to grease the clutch pedal on a Peugeot 308. The first step is to remove the plastic cover above the clutch pedal where the fuse box is located; you can detach the plastic cover by pulling it with your hands, without using a screwdriver. Once the cover is removed, take off the velvet protection for better access to grease the pedal, then remove the three clips holding it in place. At this point, you have good access to the pedals for better working conditions. Use silicone grease, as it is ideal for plastic parts.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the clutch pedal of the Peugeot 308
Replacement of the clutch pedal of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The information outlined in this guide will show us how to disassemble and replace the clutch pedal of the Peugeot 308. First, we open the front driv…
Reasons for the Clutch Pedal Not Returning on a Peugeot 308
Reasons for the Clutch Pedal Not Returning on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video, you can see the reasons why the clutch pedal of a Peugeot 308 does not return correctly. The problem, as shown in the video, is a clip…
A common problem with the clutch pedal of the Peugeot 308.
A common problem with the clutch pedal of the Peugeot 308.
Peugeot 308 (2013-2021 / T9, MK 2) We see an extremely common problem on the Peugeot 308. The clutch pedal stays on the floor and does not come back up after being pressed, leaving the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos