Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Vespa Steering Lock Removal - Removing the steering lock on a modern Vespa can be done by picking the lock or drilling out the center to drop the pins and remove the lock. Alternatively, the lock tumbler can be turned around to find the tab or the lock body can be pried out with the key in.
Page generated automatically based on user searches (*)
How to replace the steering lock on a Vespa PX 125
Vespa Px 125 .. slotted screwdriver into the gap between the steering lock cover and the steering lock, and then we will have to go for leverage. By doing so, we..
Replacement of the Piaggio Vespa PX 125 saddle lock
Vespa Px 125 .. and replace, in simple and quick steps, the lock of the seat or two-seater saddle of the Piaggio Vespa PX 125, but also of the Vespa PX 200. First..
How do you replace the ignition lock of the Vespa 125 LX?
Vespa 125 Lx .. In order to replace the ignition lock of the Vespa 125 LX you have to remove the front panel which is located immediately under the headlight, unscrewing.. .. will have to open the glovebox located under the steering wheel, again unscrewing the screws inside; this will allow you to remove the shield back plate..
Where is the Vespa 150 battery
Vespa 150 Lx .. If you need to intervene on the battery of your Vespa 150 but you do not know where it is positioned, do not worry because in the following dedicated.. .. locate the footrest panel and proceed with its removal. Once this is done you will finally have access to the vehicle battery and you can proceed with..
How do you replace the steering bearing on the Piaggio Vespa 50 S?
Vespa 50 S .. In order to replace the steering bearing of the Piaggio Vespa 50 S you have to loosen the screw that fixes the front light of..
How to solve the problem of excessive temperatures on a Piaggio Porter?
Answer: The Piaggio Porter is a work vehicle that often runs into the problem of reaching excessive temperatures, with consequent problems with the engine hea... read all

Posted on 30-04-2021

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

  1. Video tutorial
    2. >
  2. Piaggio
    3. >
  3. Vespa Gts 125
Methods for Removing the Steering Lock on a Modern Vespa: Removing the steering lock on a modern Vespa can be done by picking the lock or drilling out the center to drop the pins and remove the lock. Alternatively, the lock tumbler can be turned around to find the tab or the lock body can be pried out with the key in. Another method involves pushing the lock into the body and aligning a small external pin with the upper slot of the hole. Once the lock is removed, it can be replaced with a new one if necessary.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.