Do it yourself
Frequently asked questions about cars and motorcycles
To replace the ignition switch on a Vespa 125 LX, detach the front panel located directly under the headlamp by unscrewing the screws underneath. Next, open the glove compartment under the handlebars, also unscrewing the screws inside; this will allow you to remove the inner shield and access the ignition switch. The switch can now be disconnected from its wires and freed from its securing screws, so it can be replaced with a new one. After replacement, reattach the removed panels.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Vespa 125 Lx To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a ba…
Vespa 125 Lx This guide explains how to carry out the routine maintenance service for the oil change on the Piaggio Vespa 50 and 125 LX in simple steps. First, po…
Vespa 125 Lx To change the engine oil of the Piaggio Vespa LX 125, you need to unscrew the drain plug of the oil sump, which is located at the central lower part …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos