Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, you will see how to disassemble and replace, in simple and quick steps, the seat lock of the two-seater seat on the Piaggio Vespa PX 125, as well as the Vespa PX 200. First, open the seat and start by removing the three small screws from the lock found at the end, using a socket spanner. This way, you can slide and remove the seat lock upwards, as shown in the video. At this point, replace the lock with the new one, using the model suitable for your type of seat, and reassemble everything!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This brief guide outlines the steps to remove and replace the rear suspension on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place …
How to Replace the Front Shock Absorber on a Piaggio Vespa PX 125
How to Replace the Front Shock Absorber on a Piaggio Vespa PX 125
Vespa Px 125 To replace the front shock absorber on a Piaggio Vespa PX 125, loosen the nuts that secure the pin located at the bottom of the shock absorber, near …
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this video tutorial, you will learn how to remove and replace the transmission oil on the Piaggio Vespa Px 125, as well as on the Lml Star 125. Fi…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos