Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start by inserting the tip of a large flathead screwdriver into the gap between the steering lock cover and the lock itself, then pry it off. This will remove the cover. Next, insert the key into the lock cylinder of the steering lock and use it to extract the lock from its housing. Once you have removed the steering lock, the disassembly is complete. To fit the new steering lock and cover, simply reverse these steps, and you will have completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light of a Vespa PX 125
How to Replace the Rear Light of a Vespa PX 125
Vespa Px 125 Before you can start, position your Vespa 125 PX on the centre stand. Begin by unscrewing and removing the screws that secure the rear light to the f…
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…
How to Replace the Centre Stand on Piaggio Vespa PX 125
How to Replace the Centre Stand on Piaggio Vespa PX 125
Vespa Px 125 Watch this video to see how to disassemble and replace the centre stand on the Piaggio Vespa PX 125, as well as the PX 200. First, lift your Vespa wi…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos