Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Stand on Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125
Part:

Video tutorial

Watch this video to see how to disassemble and replace the centre stand on the Piaggio Vespa PX 125, as well as the PX 200. First, lift your Vespa with a jack, keeping the rear wheel off the ground; then use a socket spanner to unscrew the bolts of the stand found on the footboard, as shown in the video.

Next, detach the spring located at the bottom to remove and replace the stand with the new one; then simply reassemble the stand by following the reverse procedure for reassembly!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 Today, we will go through the instructions to remove and replace the spark plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, plac…
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This brief guide outlines the steps to remove and replace the rear suspension on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place …

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos