Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Yamaha Yzf R125 Engine Management Light Reset - The Yamaha YZF R125 engine management light can be reset by following a few steps. First, ensure that the side stand is up and the kill switch is on.
Page generated automatically based on user searches (*)
How to reset the "Service" light on a Yamaha YZF R125
Yzf R125 .. have to go and sit on the driver's seat of our Yamaha YZF R125. Let's start by turning the key in the ignition lock, thus turning on the instrument.. .. this is done, we will have to press and hold the reset button, until the "OIL SERV" item starts flashing, and then release the button. At this point,.. .. hold the reset button again, until the "Service" light goes out, and we are finished...
How to remove the engine malfunction indicator on the Yamaha YZF-R125?
Yzf R125 .. In this tutorial we can see how to remove the engine malfunction indicator light on the Yamaha YZF-R125, a very simple operation. Before doing so,..
How to replace the front brake pads on Yamaha YZF R125?
Yzf R125 .. see how to replace the front brake pads on the Yamaha YZF R125, a very simple and fast operation. First of all, identify the metal clip located in the..
Replace the rear brake pads on Yamaha YZF R125
Yzf R125 .. to remove and replace the rear brake pads on a Yamaha YZF R125, following the instructions below.First we put the bike on the stand and use a Allen..
How to replace the Yamaha YZF-R125 clutch
Yzf R125 .. disassemble and replace the clutch plates of the Yamaha YZF-R125 motorcycle, following the instructions below. First of all, let's put the central stand..
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

  1. Video tutorial
    2. >
  2. Yamaha
    3. >
  3. Yzf R125
Resetting the Yamaha YZF R125 Engine Management Light: The Yamaha YZF R125 engine management light can be reset by following a few steps. First, ensure that the side stand is up and the kill switch is on. Wait for 15 seconds and then turn the ignition on and off five times within five seconds. Wait for 20 seconds and then start the engine, the light should turn off. For earlier models, the engine management light can be checked by counting the flashes. If the engine oil lights are on, it is important to stop running the engine without the proper oil mixture to prevent damage. For further information, refer to the Yamaha YZF R125 service manual or consult a professional.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.