Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you can see how to replace the headlight bulbs on the Yamaha YZF-R125, a very simple and quick operation. First, ensure that the key is not inserted for safety, then locate the cap at the back of the headlight and remove it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. Now, insert the replacement bulb without touching it directly with your bare hands and reassemble everything by following the reverse procedure.

Posted on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Yamaha YZF R125
How to replace the battery of the Yamaha YZF R125
Yzf R125 .. and replace the battery of the Yamaha YZF R125 motorcycle, following the instructions below. First, we put the motorcycle on the stand and start.. …
How to replace the engine oil in the Yamaha YZF R125?
How to replace the engine oil in the Yamaha YZF R125?
Yzf R125 .. how to replace the motor oil in the Yamaha YZF R125, an extremely simple and fast operation. First of all, make sure that the engine is cool enough,.. …
Replacing the Rear Brake Pads on a Yamaha YZF R125
Replacing the Rear Brake Pads on a Yamaha YZF R125
Yzf R125 .. and replace the rear brake pads on a Yamaha YZF R125, following the instructions below. First, place the bike on a stand and use an Allen key to unscrew.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos