|
Do it yourself
| |||
| ||||
|
Model: Yamaha Yzf R125
In this tutorial, you will see how to replace the front brake pads on a Yamaha YZF R125, a very simple and quick operation. First, locate the metal clip at the bottom of the brake, then detach it using pliers and remove the pin. Next, unscrew the two bolts securing the caliper to the fork, separate it from the disc, and remove the old pads. At this point, clean any dirt residue present, position the replacement pads, and reassemble everything by simply following the reverse procedure.
Updated on 3 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Yzf R125
In order to replace the brake pads of the Yamaha YZF R125, the same operation must be carried out for both the front wheel and the rear wheel: once t…
Yzf R125
In this short video tutorial, you will learn how to remove and replace the rear brake pads on a Yamaha YZF R125, following the instructions below. Fi…
Yzf R125
To replace the rear brake pads on a Yamaha YZF R1, first loosen the bolts securing the exhaust and remove it for easier access. Next, loosen the two …
|
How to replace the coolant in the BMW S1000 R
Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
