Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Yamaha YZF R1

Model: Yamaha Yzf R125
Part: Brake pads

Video tutorial

To replace the rear brake pads on a Yamaha YZF R1, first loosen the bolts securing the exhaust and remove it for easier access. Next, loosen the two bolts holding the caliper and disconnect it from the disc.

Use a flathead screwdriver to pry out the old pads and replace them with new replacement parts. Once the new pads are in place, reinstall the caliper onto the disc and refit the previously removed exhaust.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on a Yamaha YZF R125?
How to Replace the Brake Pads on a Yamaha YZF R125?
Yzf R125 To replace the brake pads on a Yamaha YZF R125, perform the same operation for both the front and rear wheels: once the screws are loosened, disconne…
Replacing the Rear Brake Pads on a Yamaha YZF R125
Replacing the Rear Brake Pads on a Yamaha YZF R125
Yzf R125 In this short video tutorial, you will learn how to remove and replace the rear brake pads on a Yamaha YZF R125, following the instructions below. Fi…
How to Replace the Front Brake Pads on a Yamaha YZF R125?
How to Replace the Front Brake Pads on a Yamaha YZF R125?
Yzf R125 In this tutorial, you will see how to replace the front brake pads on a Yamaha YZF R125, a very simple and quick operation. First, locate the metal c…

How to Replace the Rev Sensor on a Benelli TNT 600

This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, place your motorcycle on a stand and disconnect the electrical connector of the rev sensor located on the left side engine cover; then use a socket spanner with an extension to unscrew and remove the bolt, as shown in the video. At this point, remove and replace the rev sensor, installing the original part to ensure proper functioning, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos