|
Do it yourself
| |||
| ||||
|
Model: Yamaha Yzf R125
In this short video tutorial, you will learn how to remove and replace the rear brake pads on a Yamaha YZF R125, following the instructions below. First, place the bike on a stand and use an Allen key to unscrew the fastening pin of the brake caliper. Then, remove the caliper from the disc and take out the old brake pads, as shown in the video. Next, clean the caliper of carbon residues and push the piston back in. Finally, insert the new pads and reassemble everything!
Updated on 1 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Yzf R125
In this tutorial, you will see how to replace the front brake pads on a Yamaha YZF R125, a very simple and quick operation. First, locate the metal c…
Yzf R125
In order to replace the brake pads of the Yamaha YZF R125, the same operation must be carried out for both the front wheel and the rear wheel: once t…
Yzf R125
As shown in this tutorial, replacing the air filter on a Yamaha YZF R125 is a straightforward and quick task. First, remove the rider's seat, then un…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
