Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you begin, sit on the rider's seat of your Yamaha YZF R125. Start by turning the key in the ignition switch to power on the instrument panel. Next, repeatedly press the right button on the instrument panel until you reach the "ODO" option on the multifunction display. Once there, press and hold the reset button until the "OIL SERV" message starts to flash, then release the button. At this point, press and hold the reset button again until the "Service" light turns off, and you will have completed the process.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the engine warning light on the Yamaha YZF-R125?
How to remove the engine warning light on the Yamaha YZF-R125?
Yzf R125 In this tutorial, you will see how to remove the engine warning light on the Yamaha YZF-R125, a very simple operation. Before doing this, ensure you …
How to Replace the Front Brake Pads on a Yamaha YZF R125?
How to Replace the Front Brake Pads on a Yamaha YZF R125?
Yzf R125 In this tutorial, you will see how to replace the front brake pads on a Yamaha YZF R125, a very simple and quick operation. First, locate the metal c…
How to replace the battery of the Yamaha YZF R125
How to replace the battery of the Yamaha YZF R125
Yzf R125 Today's steps will show us how to disassemble and replace the battery of the Yamaha YZF R125 motorcycle, following the instructions below. First, we …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos