Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Engine oil

To change the engine oil of a KTM Duke 390, follow these steps. Make sure the engine is warm but not hot. Place the motorcycle on a flat and stable surface. Find the oil drain plug on the bottom of the engine and unscrew it with a wrench. Place a container under the plug to collect the used oil. Allow the used oil to drain completely. Remove and check the oil filter, replacing it if necessary. Clean the area around the filter with a clean cloth. Install a new oil filter, making sure to tighten it properly. Remove the oil drain plug and add new oil according to the owner's manual specifications. Check the oil level with the dipstick and add oil if necessary. Make sure to use the recommended engine oil for your KTM Duke 390. Tighten the oil drain plug securely. Start the engine and let it run for a few minutes to allow the new lubrication to circulate. Check the oil level again and add if necessary. Dispose of the used oil properly at an authorized collection center.

Posted on 26 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every 12 months. Firs…
How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos