Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine, locate the oil drain plug and remove it with the appropriate wrench, allowing the used oil to completely drain into a suitable container.

Once the oil has completely drained, screw the drain plug back on and tighten it properly. Next, locate the oil fill opening on the engine and fill it with the recommended new oil, using a funnel to prevent spills.

Check the oil level to make sure it is correct, adding more oil if necessary. After completing the filling, start the engine and let it run for a few minutes to distribute the new oil. Finally, turn off the engine and check the oil level again, adding more if needed.


Posted on 3 July 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a KTM DUKE 390?
Duke 390 To change the engine oil of the KTM Duke 390, start by briefly warming up the engine to help the old oil flow out. Turn off the bike and place it on …
How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…
How to change the engine oil on a KTM Duke 390?
How to change the engine oil on a KTM Duke 390?
Duke 390 To change the engine oil on a KTM Duke 390, follow these steps. Ensure the engine is warm but not hot. Position the bike on a flat and stable surface…

How to Replace the Battery of the Ducati XDiavel S?

To replace the battery of the Ducati XDiavel S, loosen the screws securing the cover panel located at the lower front of the bike, just behind the front wheel: once this panel is removed, you can locate the battery underneath. Release the battery from its housing by unscrewing the screws and disconnecting the power cables; this will allow you to insert the new battery, connecting and securing it properly. Finally, cover everything with the panel and check its operation.

Watch the video!


by ScegliAuto

More videos