Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the crankshaft of the Peugeot Speedfight 2, you need to loosen the screws that secure the engine block to its housing, also disconnecting all connectors and hoses, so that the engine can be completely removed: at this point, you can unscrew the screws that secure the cylinder to its seat. The underlying piston and corresponding connecting rod must be disassembled, allowing access to the crankshaft: it must be freed from its bearings and then replaced with a new one. After the replacement, all previously disassembled components can be reassembled.

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Peugeot Speedfight 2?
How do you disassemble the engine of the Peugeot Speedfight 2?
Speedfight 2 It will be possible to disassemble the engine of the Peugeot Speedfight 2 by loosening the screws that fix it to the frame's housing in the center, a…
How do you replace the exhaust pipe of the Peugeot Speedfight?
How do you replace the exhaust pipe of the Peugeot Speedfight?
Speedfight 2 In order to replace the exhaust of the Peugeot Speedfight 2, you need to loosen the screws that fix it to the appropriate supports on the right side …
How do you replace the transmission of the Peugeot Speedfight 2?
Speedfight 2 In order to replace the transmission of the Peugeot Speedfight 2, you need to loosen the screws that secure the transmission casing, located near the…

How do you replace the headlight bulb of the Sym Citycom 300?

In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle fairing: once the fastening screws of these panels have been loosened, you can unscrew those on the inside of the front fairing, so that the latter can be removed from its seat. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting its connector and removing the bulb inside; in this way you can reinstall the removed panels.

Watch the video!


by ScegliAuto

More videos