Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX

Model: Piaggio Vespa 125 Lx
Part: Headlight bulb

Video tutorial

To replace the headlamp bulb on a Piaggio Vespa 125 LX, loosen the screw that secures the headlamp in its housing so that it can be fully removed. Once the headlamp is removed, pull out the bulb from inside and disconnect the connector attached to it. Connect the new bulb to the connector, ensuring it is inserted back into its housing.

After inserting the bulb, refit the headlamp using its screw.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, you will see how to replace the headlight bulb on a Piaggio Vespa 125 LX scooter, a very simple and quick operation. First, ensure …
Removing the Front Headlight on a Piaggio Vespa LX 125
Removing the Front Headlight on a Piaggio Vespa LX 125
Vespa 125 Lx Start by unscrewing the two screws under the handlebar on the rider's side, as clearly shown in the video. Now remove the cover over the screw on the…
How to Replace the Front Headlight Bulb on a Piaggio Vespa LX 125
How to Replace the Front Headlight Bulb on a Piaggio Vespa LX 125
Vespa 125 Lx This guide shows how to replace the front headlight bulb on the Piaggio Vespa LX. The first step is to remove the logo plate using a trim removal too…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos