Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to replace the front headlight bulb on the Piaggio Vespa LX. The first step is to remove the logo plate using a trim removal tool. This reveals a screw that must be removed to disassemble the front plastic casing. At this point, unscrew the fastening screw of the front plastic of the handlebar and, after removing the mirrors using the screws located under the handlebar, you can detach the headlight assembly. Disconnect the wires for more working space. To replace the bulb, simply lift the protective seal and turn the bulb holder counter-clockwise. The bulb has a bayonet fitting; to replace it, just press lightly and turn. Now, following the previous steps, you can reassemble all the pieces. After checking the correct operation of the headlight, the replacement is complete.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
Vespa 125 Lx To replace the headlamp bulb on a Piaggio Vespa 125 LX, loosen the screw that secures the headlamp in its housing so that it can be fully removed. On…
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, you will see how to replace the headlight bulb on a Piaggio Vespa 125 LX scooter, a very simple and quick operation. First, ensure …
How to replace the headlight bulb of the Piaggio Vespa 125 LX
How to replace the headlight bulb of the Piaggio Vespa 125 LX
Vespa 125 Lx By following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the Piaggio Vesp…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos