Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
By following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the Piaggio Vespa 125 LX scooter. First, we put the scooter on the central stand and start unscrewing the fixing screws found under the handlebars, in order to remove it; then we disconnect the electrical connector of the lights, as shown in the video. At this point, we release the bulb and replace it with a new one, of the correct type and with the same attachment; then we reassemble the headlight and finally the handlebars, following the video tutorial until the end!

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
How to replace the headlight bulb on a Piaggio Vespa 125 LX scooter?
Vespa 125 Lx In this tutorial, you will see how to replace the headlight bulb on a Piaggio Vespa 125 LX scooter, a very simple and quick operation. First, ensure …
How to Replace the Front Headlight Bulb on a Piaggio Vespa LX 125
How to Replace the Front Headlight Bulb on a Piaggio Vespa LX 125
Vespa 125 Lx This guide shows how to replace the front headlight bulb on the Piaggio Vespa LX. The first step is to remove the logo plate using a trim removal too…
How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
How to Replace the Headlamp Bulb on a Piaggio Vespa 125 LX
Vespa 125 Lx To replace the headlamp bulb on a Piaggio Vespa 125 LX, loosen the screw that secures the headlamp in its housing so that it can be fully removed. On…

How to adjust the valve clearance on the Moto Guzzi V85TT

Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible to adjust the valve clearance of the Moto Guzzi V85TT by yourself. First, put the motorcycle on the center stand and start by removing the cylinder head cover, unscrewing all the fixing screws; then use a feeler gauge to measure the valve clearance, adjusting it according to the instructions in the motorcycle's user manual, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos