Do it yourself
| ||||
|
Model: Suzuki Boulevard
To change the engine oil of a Suzuki Boulevard, start by making sure the engine is cold. Lift the motorcycle on a central or side stand to stabilize it. Find the oil drain plug on the engine and the oil fill plug on the oil tank. Place a collection container under the drain plug. Use a wrench to loosen the drain plug and let the used oil drain completely. Once drained, remove and check the oil filter. Replace it if necessary. Lubricate the gasket of the new filter with new engine oil and install it. Tighten the drain plug with the correct torque. Pour new oil into the oil tank using a funnel until reaching the correct amount, as indicated in the owner's manual. Close the oil fill plug, and the oil change is complete.
Posted on 26 April 2024 by ScegliAuto
|
How do you replace the brake cable of the Piaggio Vespa PX 125?In order to replace the brake cable of the Piaggio Vespa PX 125, you need to loosen the bolt that secures the end of the cable to the lever located on the right side of the handlebar: once this bolt is loosened, you can detach this end and proceed by loosening the screws that secure the front fairing, removing it from its seat. By doing so, the entire cable can be extracted and you can also loosen the screws that secure it to the corresponding brake caliper; in this way, you can insert the new cable, checking that everything works properly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |