Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to raise and lower the windshield of the Yamaha X-MAX 125

Model: Yamaha X Max
Part: Checks and maintenance

Video tutorial

In this video we can see how to raise or lower the front windshield of the Yamaha X-MAX 125 scooter: we notice that on the transparent part there are two screws that we need to unscrew, then we will remove the two plastic gaskets that protect the other screws, which we will find underneath them.

We also unscrew this and then remove the transparent windshield.

We remove the metal screws underneath and reposition the transparent part according to our needs; there are four screws on each side that allow us to have a certain range of adjustability, both up and down. We put the plastic gasket back in place, which we will close with its fixing screw and the job is done.


Posted on 15 December 2024 by ScegliAuto


Related tutorials

How to change the time on the 2013 X Max 125
How to change the time on the 2013 X Max 125
X Max .. on the instrument panel of the 2013 Yamaha X Max 125. The procedure takes less than 1 minute to be completed and does not require any tools. To adjust.. …
Replacing the remote control battery for the Yamaha X-Max
Replacing the remote control battery for the Yamaha X-Max
X Max Here’s how to change the battery in a Yamaha X-Max remote control: it uses a common CR 2032 button battery, available at any electronics store or sup…
How to replace the rearview mirror of the Yamaha X Max
How to replace the rearview mirror of the Yamaha X Max
X Max Today we will see how to replace the rearview mirror of the Yamaha X Max on our own. The cost of a new single mirror at an auto parts store is 35.00€…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos