Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the remote control battery for the Yamaha X-Max

Model: Yamaha X Max
Part: Key

Video tutorial

Here’s how to change the battery in a Yamaha X-Max remote control: it uses a common CR 2032 button battery, available at any electronics store or supermarket. You will only need a small screwdriver to pry open the side slot at the bottom of the casing, allowing the two halves to separate.

Once opened, the battery will be visible, and a slight lever will be needed to remove it from its housing. Insert the new battery, ensuring correct polarity, close the two halves of the casing, and press until you hear a click.


Posted on 12 October 2026 by ScegliAuto


Related tutorials

X Max Today we will see how to replace the rearview mirror of the Yamaha X Max on our own. The cost of a new single mirror at an auto parts store is 35.00€…
X Max In this video we can see how to raise or lower the front windshield of the Yamaha X-MAX 125 scooter: we notice that on the transparent part there are…
X Max Let’s see how to reset the service light on a Yamaha X-Max: Insert the key into the instrument panel without starting the engine. Then press the "sel…

How to Replace the Exhaust on a GasGas EC 250F?

To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening these bolts, you will be able to remove the cover and access the screws that attach the exhaust to its supports. Next, also loosen the bolts that connect the exhaust to the exhaust pipe: this will allow you to completely remove the old exhaust and fit the new one, which must be secured to the respective supports and the exhaust pipe.

Watch the video!


by ScegliAuto

More videos