Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Honda CBR 1000RR?

Model: Honda Cbr 1000rr
Part: Brake pads

Video tutorial

In order to replace the front brake pads of the Honda CBR 1000RR, you will need to loosen the screws that hold the brake caliper corresponding to its housing on the disc: once the caliper has been released, it will be possible to remove it from the disc so that the old pads can be removed after removing the corresponding fixing pin. Then it will be possible to insert the new pads inside the caliper in order to lock them with the pin: then you can reposition the caliper on the disc and secure it with the appropriate screws, checking that everything works properly.


Posted on 17 March 2025 by ScegliAuto


Related tutorials

How to Remove and Replace the Front Brake Pads on the Honda CBR 1000RR
How to Remove and Replace the Front Brake Pads on the Honda CBR 1000RR
Cbr 1000rr Today we will discover the instructions on how to remove and replace the front brake pads on the Honda CBR 1000RR. First, place the bike on a stand a…
How to Replace the Rear Wheel of the Honda CBR 1000RR
How to Replace the Rear Wheel of the Honda CBR 1000RR
Cbr 1000rr Follow this guide for instructions on how to remove and replace the rear wheel of the Honda CBR 1000RR using these simple steps. First, place your mo…
Removing Front Mudguard on Honda CBR 1000RR
Removing Front Mudguard on Honda CBR 1000RR
Cbr 1000rr In today's video, you will find instructions for removing the front mudguard on a Honda CBR 1000RR. To remove the mudguard, you need to take off the …

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos