Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cbr 1000rr
Part:

In today's video, you will find instructions for removing the front mudguard on a Honda CBR 1000RR. To remove the mudguard, you need to take off the front wheel; therefore, position the bike on the front stand and remove the bolts securing the brake calipers; once the calipers and pads are removed, take off the front wheel by unscrewing the central axle. At this point, unscrew the side screws securing the mudguard to remove it, as illustrated in the video; if necessary, replace it and reassemble everything, following the video to the end!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbr 1000rr You can replace the exhaust fitted on the Honda CBR 1000RR by loosening the screws that secure the exhaust end can to its housing, near the rear mudg…
Cbr 1000rr To replace the front wheel on a Honda CBR 1000RR, first loosen the bolts securing the front brake caliper to the corresponding disc. Once the caliper…
Cbr 1000rr Today, you will learn how to bleed the cooling system and replace the radiator fluid or antifreeze on a Honda CBR 1000RR. First, unscrew the cap of t…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos