Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 1000rr
Part: Wheel

Follow this guide for instructions on how to remove and replace the rear wheel of the Honda CBR 1000RR using these simple steps. First, place your motorcycle on a stand and lift the rear wheel off the ground using the appropriate stand; then, unscrew the central axle of the wheel, also removing the brake caliper as shown in the video. At this point, disconnect the drive chain and remove the wheel, replacing the tyre if necessary; then, refit the rear wheel and the brake caliper, applying the reverse procedure!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant on a Honda CBR 1000RR
How to Replace the Coolant on a Honda CBR 1000RR
Cbr 1000rr Today, you will learn how to bleed the cooling system and replace the radiator fluid or antifreeze on a Honda CBR 1000RR. First, unscrew the cap of t…
How to Change the Engine Oil on the Honda CBR 1000RR?
How to Change the Engine Oil on the Honda CBR 1000RR?
Cbr 1000rr To change the engine oil on the Honda CBR 1000RR, unscrew the plug located at the central lower part of the bike to collect all the used oil in a sui…
How to Change the Engine Oil in a Honda CBR 1000RR
How to Change the Engine Oil in a Honda CBR 1000RR
Cbr 1000rr In this tutorial, see how to change the engine oil in a Honda CBR 1000RR, a very simple and quick operation. First, ensure the engine is sufficiently…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos