Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Px 125
Part:

In order to replace the levers of the Piaggio Vespa PX 125, you need to loosen the screws located at the beginning of both levers, in their upper part near the base of the handlebar. Once these screws are loosened, it will be possible to completely remove the levers from their housing and then detach them from their activation mechanism. After the old levers have been removed from their housing, you can insert the new levers: these must be fixed by inserting the corresponding screws and securing them properly.

Posted on 26 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake cable of the Piaggio Vespa PX 125?
How do you replace the front brake cable of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the front brake cable of the Piaggio Vespa PX 125, you need to loosen the nut that secures the cable to the corresponding lever, …
How do you disassemble the engine of the Piaggio Vespa PX 125?
How do you disassemble the engine of the Piaggio Vespa PX 125?
Vespa Px 125 To disassemble the engine of the Piaggio Vespa PX 125, you will need to loosen the screws that secure the body panel covering the engine block in the…
How do you replace the rear shock absorber of the Piaggio Vespa PX 125?
How do you replace the rear shock absorber of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the rear shock absorber of the Piaggio Vespa PX 125, you will first need to remove the fairing panels around the underseat compar…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos