|
Do it yourself
| |||
| ||||
Model: Sym Maxsym 400
To replace the rear wheel of the Sym MaxSym 400, first loosen the bolts securing the exhaust to its housing so that it can be completely removed from the exhaust pipe. Once the exhaust is removed, proceed to take off all transmission components, including the variator, clutch, and belt. This will allow you to unscrew the central nut that secures the wheel to the swingarm, removing the pin and the corresponding wheel. At this point, you can insert the new wheel and reassemble all the components you just removed.
Updated on 12 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Maxsym 400
To replace the belt on a Sym MaxSym 400, loosen the bolts securing the transmission cover located near the rear wheel on the left side of the scooter…
Maxsym 400
Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…
Maxsym 400
To disassemble the transmission of the Sym MaxSym 400, you need to loosen all the bolts securing the plastic cover protecting the casing near the rea…
|
How to Reset the Oil Light on a Honda PCX 160
In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.539
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
