Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Maxsym 400
Part: Drivetrain

To disassemble the transmission of the Sym MaxSym 400, you need to loosen all the bolts securing the plastic cover protecting the casing near the rear wheel. Beneath the plastic cover, there will be a steel one that must be removed in the same manner. At this point, you will have access to the transmission: by loosening the nuts of the central pins of the variator and the clutch, you can remove both parts and consequently the belt. Once the old parts are removed, you can replace them and close the casing with the respective covers.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Maxsym 400 To replace the belt on a Sym MaxSym 400, loosen the bolts securing the transmission cover located near the rear wheel on the left side of the scooter…
Maxsym 400 To replace the rear wheel of the Sym MaxSym 400, first loosen the bolts securing the exhaust to its housing so that it can be completely removed from…
Maxsym 400 Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos