Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Timing Belt from a Sym Maxsym 400

Model: Sym Maxsym 400
Part:

Video tutorial

In today's video tutorial, you will see how to remove the timing belt from a Sym Maxsym 400cc. First, remove the cover from the casing by unscrewing all the fixing screws with a spanner; then access the transmission side casing, where you will unscrew the bolts to reach the variator and the timing kit. Once there, remove the clutch along with the variator and pulley, and simultaneously extract the timing belt, as shown in the video; then replace it with the new one and reassemble everything!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on a Sym MaxSym 400?
How to Replace the Belt on a Sym MaxSym 400?
Maxsym 400 To replace the belt on a Sym MaxSym 400, loosen the bolts securing the transmission cover located near the rear wheel on the left side of the scooter…
How to Remove the Front Fairing of a Sym MaxSym 400
How to Remove the Front Fairing of a Sym MaxSym 400
Maxsym 400 Before you can start, position your Sym MaxSym 400 on the centre stand. Begin by removing the rear-view mirrors by unscrewing the securing screws. Ne…
How to Disassemble the Transmission of the Sym MaxSym 400?
How to Disassemble the Transmission of the Sym MaxSym 400?
Maxsym 400 To disassemble the transmission of the Sym MaxSym 400, you need to loosen all the bolts securing the plastic cover protecting the casing near the rea…

How to Remove the Rear Wheel of the Honda SH 150i

Below are the instructions that will allow you to remove and replace the rear wheel or tyre of the Honda SH 150i scooter. First, place your scooter on the centre stand and begin by removing the exhaust silencer, unscrewing the fastening screws; then remove it from the collector. At this point, unscrew the central nut of the wheel using a socket spanner with an extension; then remove the wheel from the axle, replacing the tyre if necessary. Finally, refit the rear wheel by applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos