Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This brief and simple guide provides instructions for replacing the coolant in a Ducati Multistrada 1260S. First, place your motorcycle on the centre stand and begin to unscrew the screws of the plastic fairing located on the left side; then unscrew the coolant drain bolt, allowing it to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the radiator filler cap and top up the coolant until it reaches the maximum level mark!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Ducati Multistrada 1260S?
How to Change the Engine Oil in a Ducati Multistrada 1260S?
Multistrada 1260 This tutorial shows how to change the engine oil in a Ducati Multistrada 1260S, a very simple and quick operation. First, ensure the engine is suffic…
How to replace the cooling liquid of the Ducati Multistrada 1260
How to replace the cooling liquid of the Ducati Multistrada 1260
Multistrada 1260 Today we will see step by step instructions on how to replace the engine coolant of the Ducati Multistrada 1260. First of all, we put the motorcycle …
How to Replace Front Brake Pads on Ducati Multistrada 1260
How to Replace Front Brake Pads on Ducati Multistrada 1260
Multistrada 1260 In this tutorial video, you will see the instructions to remove and replace the front brake pads on the Ducati Multistrada 1260, following these simp…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos