Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 125
Part: Engine oil

To change the engine oil on a Beta RR 125, loosen the drain plug located at the central lower part of the bike. Once removed, you can collect all the used oil in a suitably positioned container. When the oil has completely drained, you can also remove the oil filter located next to the drain plug to replace it with a new one. Now you can top up the oil by adding the necessary amount through the breather located on the left side of the bike.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Engine Oil and Oil Filter on the Beta RR 125
Replace the Engine Oil and Oil Filter on the Beta RR 125
Rr 125 In today's tutorial, you will see how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 125 enduro bike. First…
How to change the engine oil on the Beta RR 125?
How to change the engine oil on the Beta RR 125?
Rr 125 You can replace the engine oil on the Beta RR 125 by loosening the drain plug located at the central lower part of the vehicle: once removed, you can…
How do you replace the motor oil in the Beta RR 125?
How do you replace the motor oil in the Beta RR 125?
Rr 125 It will be possible to replace the motor oil of the Beta RR 125 by loosening the drain plug of the oil pan: this will be located in the central lower…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos