Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 125
Part: Engine oil

In today's tutorial, you will see how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 125 enduro bike. First, unscrew the oil drain bolt located under the engine to allow the oil to drain into a container for about ten minutes; then unscrew the screws on the oil filter cover found on the clutch casing, removing and replacing the cartridge with a new one. Now open the fill hole and pour in the new engine oil with the correct specifications.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 To change the engine oil on a Beta RR 125, loosen the drain plug located at the central lower part of the bike. Once removed, you can collect all the…
Rr 125 You can replace the engine oil on the Beta RR 125 by loosening the drain plug located at the central lower part of the vehicle: once removed, you can…
Rr 125 It will be possible to replace the motor oil of the Beta RR 125 by loosening the drain plug of the oil pan: this will be located in the central lower…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos