Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Royal Enfield Classic 350, start by positioning the motorcycle on a stable surface, ideally using a center stand to keep it balanced. Make sure the engine is warm, as the oil drains more easily when it is not cold. Locate the drain plug located under the engine base and place a container underneath it to collect the used oil. Using a suitable wrench, unscrew the plug and let the oil drain completely. Once drained, clean the plug and check that the gasket is in good condition. Carefully screw the plug back in, avoiding over-tightening. Proceed to fill the oil tank with the type and quantity specified by the manufacturer, using a funnel to prevent spills. Check the level with the dipstick or indicator on the engine, adding oil if necessary until you reach the ideal amount. Start the engine for a few minutes, turn it off, and recheck the level, adjusting if necessary.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Royal Enfield Classic 350?
Classic 350 In this tutorial, see how to change the engine oil in a Royal Enfield Classic 350, a very simple and quick operation. First, ensure the engine is coo…
How to Change the Engine Oil in the Royal Enfield Classic 350?
How to Change the Engine Oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial, you will see how to change the engine oil in the Royal Enfield Classic 350, an extremely simple and quick operation. First, ensure …
Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos