Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the motor oil in the KTM Super Duke R, an extremely simple and fast operation. First of all, we wait for the engine to be cold enough, then we place a container under the bike, locate the plugs of the two drainage holes and unscrew them using a 13mm socket wrench. We then let all the oil in the system drain out, remove the secondary filter and clean it from any dirt residue. At this point, all that's left to do is to open the main filter housing, insert the replacement, reassemble everything and pour the new oil through the top hole.

Posted on 11 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a KTM 1290 Super Duke R?
How to Change the Engine Oil in a KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, we will see how to change the engine oil in a KTM 1290 Super Duke R, a very simple and quick operation. First, ensure that the engi…
How to replace the motor oil in the KTM 1290 Super Duke R?
How to replace the motor oil in the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, we can see how to replace the motor oil in the KTM 1290 Super Duke R, an extremely simple and fast operation. First of all, we wait…
How to Change the Engine Oil in the KTM 1290 Super Duke R?
How to Change the Engine Oil in the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, you will see how to change the engine oil in the KTM Super Duke R, a very simple and quick operation. First, wait for the engine to…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos