Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Gilera Runner 180?

Model: Gilera Runner 180
Part: Engine

Video tutorial

The assembly of the engine on the Gilera Runner 180 can be carried out by first disconnecting all the fairings of the motorcycle that will be around it, so that it is possible to loosen all the screws of the supports and the related tubes and connectors connected to the engine.

When the block has been removed, it will be possible to proceed by removing the spark plug and unscrewing the screws that fix the cylinder.

Then the piston inside it must be disconnected from its connecting rod by widening the fixing ring and then the screws fixing the semi-crankcase can be unscrewed, accessing further components.


Posted on 23 February 2025 by ScegliAuto


Related tutorials

How to Dismantle the Engine of a Gilera Runner 180?
How to Dismantle the Engine of a Gilera Runner 180?
Runner 180 To dismantle the engine of a Gilera Runner 180, first, detach all the fairings around the bike to loosen all the screws of the supports and the relat…
How to Replace the Piston on a Gilera Runner 180
How to Replace the Piston on a Gilera Runner 180
Runner 180 To replace the piston on a Gilera Runner 180, extract the engine from its housing by unscrewing the bolts securing it to the supports. Once the engin…
How to Dismantle the Engine of the Gilera Runner 180?
How to Dismantle the Engine of the Gilera Runner 180?
Runner 180 To dismantle the engine of the Gilera Runner 180, first detach all the fairings around the bike so that you can unscrew all the screws of the support…

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos