Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Gilera Runner 180?

Model: Gilera Runner 180
Part: Engine

Video tutorial

To dismantle the engine of a Gilera Runner 180, first, detach all the fairings around the bike to loosen all the screws of the supports and the related pipes and connectors attached to the block. Once the engine is extracted, proceed by removing the spark plug and unscrewing the bolts that secure the cylinder.

Then, the piston inside must be detached from its connecting rod by removing the retaining ring, and subsequently, you can unscrew the bolts that secure the crankcase halves, replacing any internal components as necessary.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Gilera Runner 180?
How to Dismantle the Engine of the Gilera Runner 180?
Runner 180 To dismantle the engine of the Gilera Runner 180, first detach all the fairings around the bike so that you can unscrew all the screws of the support…
How to dismantle the engine of the Gilera Runner 180?
Runner 180 The process of dismantling the engine of the Gilera Runner 180 starts by removing all the fairings around it, allowing you to unscrew all the bolts o…
How to Remove the Engine from a Gilera Runner 180?
How to Remove the Engine from a Gilera Runner 180?
Runner 180 To remove the engine from a Gilera Runner 180, first detach all the side fairings of the bike surrounding it, allowing you to loosen all the screws o…

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos