Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Runner 180

Gilera Runner 180 - Videoguide

Gilera Runner 180
How do you dismantle the engine of the Gilera Runner 180?
The disassembly operation of the Gilera Runner 180 engine is carried out by first disconnecting all the fairings of the motorcycle that are around it, so that …read all…
Posted on 29 October 2023 by ScegliAuto
Gilera Runner 180
How do you replace the head gasket on the Gilera Runner 180 XVR?
To replace the head gasket on the Gilera Runner 180 XVR, you must remove the entire engine from its housing: to do this, you will need to detach the side …read all…
Posted on 13 May 2023 by ScegliAuto
Gilera Runner 180
How do you replace the piston of the Gilera Runner 180?
To replace the piston of the Gilera Runner 180, you need to extract the engine from inside its housing compartment by unscrewing the fixing screws from the …read all…
Posted on 29 April 2023 by ScegliAuto
Gilera Runner 180
How do you disassemble the Gilera Runner 180 engine?
In order to disassemble the engine of the Gilera Runner 180 you must first of all detach all the fairings of the motorbike that are located around it, so that …read all…
Posted on 24 April 2023 by ScegliAuto
Gilera Runner 180
How do you replace the water pump on the Gilera Runner 180 VXR?
In order to replace the water pump on the Gilera Runner 180 VXR you need to loosen the bolts that fix the muffler on the right side and at the rear wheel of …read all…
Posted on 20 November 2022 by ScegliAuto
Gilera Runner 180
How do you replace the forks of the Gilera Runner 180?
In order to replace the forks of the Gilera Runner 180 you have to completely disassemble the front fairing that surrounds the steering: in this way it will be …read all…
Posted on 30 October 2022 by ScegliAuto
Gilera Runner 180
How do you replace the Gilera Runner 180 frame bushings?
In order to replace the bushings on the Gilera Runner 180 frame, you have to completely disassemble the side fairings of the bike, which are located in …read all…
Posted on 13 July 2022 by ScegliAuto
Bushings (1) Checks and maintenance (1) (1) Engine (2) Pump (1) Engine head (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos