|
Do it yourself
| |||
| ||||
|
Model: Gilera Runner 180
To replace the piston on a Gilera Runner 180, extract the engine from its housing by unscrewing the bolts securing it to the supports. Once the engine is removed, unscrew the bolts that secure the two half-casings; by removing the cylinder, you will access the piston, which must be detached from its conrod by removing the retaining ring. This way, you can install the new piston and reassemble the cylinder and engine, placing it back in its housing.
Updated on 24 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Runner 180
The assembly of the engine on the Gilera Runner 180 can be carried out by first disconnecting all the fairings of the motorcycle that will be around …
Runner 180
The disassembly of the Gilera Runner 180 engine is carried out by first disconnecting all the fairings of the motorcycle that are around it, so that …
Runner 180
The disassembly of the Gilera Runner 180 engine can be done by first disconnecting all the side fairings of the motorcycle that are around it, so tha…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |