Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front brake pads on the Gilera Runner 180, you will need to unscrew the bolts that secure the brake caliper to its housing, located on the side of the disc: once the fixing bolts are removed, it will be possible to completely detach the caliper from the disc so that the retaining pins of the pads can be removed. The old pads can now be extracted so that new ones can be inserted, securing them with the same pin: after insertion, reposition the caliper to ensure that the brake functions correctly.

Posted on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Gilera Runner 180?
How do you replace the front brake pads of the Gilera Runner 180?
Runner 180 To replace the front brake pads of the Gilera Runner FXR 180, you will need to loosen the screws that secure the brake caliper to its housing, on the…
How to Replace the Frame Bushes on a Gilera Runner 180?
How to Replace the Frame Bushes on a Gilera Runner 180?
Runner 180 To replace the frame bushes on a Gilera Runner 180, you need to completely remove the side fairings of the bike, located near the underseat compartme…
How to Replace the Forks on the Gilera Runner 180?
How to Replace the Forks on the Gilera Runner 180?
Runner 180 To replace the forks on the Gilera Runner 180, you need to completely remove the front fairing that surrounds the steering: this will allow access to…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos