Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Forks on the Gilera Runner 180?

Model: Gilera Runner 180
Part:

Video tutorial

To replace the forks on the Gilera Runner 180, you need to completely remove the front fairing that surrounds the steering: this will allow access to the components that secure the forks from the inside. First, you must completely remove the steering, then you can remove the bearings: the forks will need to be extracted from the bottom, along with the corresponding wheel.

This will then need to be removed by loosening the nut that secures the central axle, installing it onto the new forks: after installation, you can refit the forks and also reattach the previously removed fairings.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Gilera Runner 180?
How to Replace the Exhaust on a Gilera Runner 180?
Runner 180 To replace the exhaust on a Gilera Runner 180, first loosen the screws that secure the exhaust terminal to its housing, located on the right side of …
How to Replace the Drive Belt and Variator on a Gilera Runner 180
How to Replace the Drive Belt and Variator on a Gilera Runner 180
Runner 180 In this guide, we will see the main instructions on how to disassemble and replace the drive belt and the radiator on a Gilera Runner 180. First, pla…
How to replace the exhaust on the Gilera Runner 180?
How to replace the exhaust on the Gilera Runner 180?
Runner 180 The procedure for replacing the exhaust on the Gilera Runner 180 involves loosening the screws that secure the exhaust end can to its housing, locate…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos