Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Runner 180
Part:

In this guide, we will see the main instructions on how to disassemble and replace the drive belt and the radiator on a Gilera Runner 180. First, place the scooter on its stand and start unscrewing the fastening screws of the side cover of the transmission to remove it; then unscrew the nut of the fan, subsequently removing the drive belt and the variator, as shown in the video. At this point, perform the inspection or replacement of the components, installing the new belt; assemble and correctly reassemble the transmission, finally remounting the cover.

Posted on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on a Gilera Runner 180?
How to Replace the Belt on a Gilera Runner 180?
Runner 180 To replace the belt on a Gilera Runner 180, you will need to loosen the screws securing the transmission cover located near the rear wheel, on its le…
How to Replace the Front Brake Pads on the Gilera Runner 180?
How to Replace the Front Brake Pads on the Gilera Runner 180?
Runner 180 To replace the front brake pads on the Gilera Runner 180, you will need to unscrew the bolts that secure the brake caliper to its housing, located on…
How do you replace the exhaust pipe of the Gilera Runner 180?
How do you replace the exhaust pipe of the Gilera Runner 180?
Runner 180 The procedure for replacing the exhaust on the Gilera Runner 180 is carried out by loosening the screws that hold it to its housing: once these screw…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos