Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Gilera Runner 180?

Model: Gilera Runner 180
Part:

Video tutorial

To replace the belt on a Gilera Runner 180, you will need to loosen the screws securing the transmission cover located near the rear wheel, on its left side. Once the cover has been removed, you can loosen all the bolts that secure the clutch bell and the variator: this will allow you to free the belt from its seat so that you can insert the new one. Once the new belt is in place, you can reposition the clutch and variator to ensure everything is functioning correctly.


Updated on 30 January 2026 by ScegliAuto


Related tutorials

Runner 180 In this guide, we will see the main instructions on how to disassemble and replace the drive belt and the radiator on a Gilera Runner 180. First, pla…
Runner 180 To replace the piston on a Gilera Runner 180, extract the engine from its housing by unscrewing the bolts securing it to the supports. Once the engin…
Runner 180 You can dismantle the engine of the Gilera Runner 180 by loosening the screws that secure it to its housing, located at the central lower part of the…

How to Replace the Water Pump on a Gilera DNA 50

To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components.

Watch the video!


by ScegliAuto

More videos